Bunting Inc. • 20 River
Road • Verona, PA 15147 • 800-735-0445 • FAX
412-820-4404
Celebrating over 135 years of customer
service and quality
Ammonia Identification Systems
Meet requirements of IIAR Bulletin 114
standard for identification of ammonia systems. Choose from 3
types of markers: Identiflow, Wrapmark, and Strap-Mark. The
Identiflow is a pressure sensitive product, while the Wrap-Mark
and Strap-Mark are mechanically affixed. Custom markers are
available.
Standard Length Pressure
Size
Part No.
Accumulator
Low
3-1/2" x 30" BC-01
Compressor
_
3-1/2" x 24" BC-02
Condenser
High
3-1/2" x 24" BC-03
Heat Exchanger Low
3-1/2" x
30" BC-04
Intercooler
Low
3-1/2" x 24" BC-05
Receiver
High
3-1/2' x 24"
BC-06
Recirculator
Low
3-1/2" x 24" BC-07
Thermosyphon
Receiver
High
3-1/2" x 30"
BC-08
Transfer Vessel High
3-1/2" x
20" BC-09
Oil Separator
High
3-1/2" x 24" BC-10
IIAR Wallet Cards and Wall Charts
Wallet cards allow for immediate personal
access to Ammonia labelng definitions. Durable laminated
plastic provides full colro graphics. Packaged in quantities of
10.
Strap Mark Pipe
These markers are highly recommended for
jacketed insulated piping systems on rooftop applications or
other rugged environments.
The Strapmark™ consists of an
Ammonia Identiflow mounted to a polycarbonate carrier.
Available in 3 sizes to accommodate standard Ammonia Identiflow
sizes. Stainless steel wire or strapping is available.
